Gemmy 88685 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Gemmy 88685. Gemmy 88685 Instructions / Assembly Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
WARNING: READ AND
UNDERSTAND ALL
INSTRUCTIONS.
Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
WARNING:
ELECTRIC PRODUCT.
Keep away from children. Not recom-
mended for children under 3 years of age. As with all electri-
cal products, precautions should be observed during handling
and use to reduce the risk of electric shock. If the supply cord
is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
To avoid the risk of electrical shock, always make sure the figure
is unplugged from the electrical outlet before assembling, disas-
sembling, or relocating.
WARNING:
This product is to be assembled by adults only
.
IMPORTANT SAFETY
INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS , BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
1. This is an electrical product - not a toy! To avoid risk of fire,
burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
2. Do not use seasonal products outdoors unless marked suitable
for indoor and outdoor use. When products are used in
outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
3. This seasonal use product is not intended for permanent
installation or use.
4. Do not mount or place near gas or electric heaters, fireplaces,
candles, or other similar sources of heat.
5. Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
7. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
8. Do not use this product for other than its intended purpose.
9. Do not hang ornaments or other objects from cord, wire, or
light string.
10. Do not close doors or windows on the product, or extension
cords, as this may damage the wire insulation.
11. Do not cover the product with a cloth, paper, or any material
not part of the product when in use.
12. Do not place the product against carpeting, furniture, or any
other fabric when in use.
13. This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock. This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician. Do not use an
extension cord unless the plug can be fully inserted. Do not
alter or replace the plug.
14. This product employs overload protection (fuse). A blown
fuse indicates an overload or a short-circuit condition. If the
fuse blows, unplug the product from the outlet. Also unplug
any additional string or products that may be attached to the
product. Replace the fuse as per the user servicing instructions
(follow product markings for proper fuse rating) and check
the product. If replacement fuse blows, a short-circuit may
be present and the product should be discarded.
15. Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. When the product is placed on a live tree, the tree should
be well maintained and fresh. Do not place on live trees in
which the needles are brown or break off easily. Keep the tree
holder filled with water.
2. If the product is placed on a tree, the tree should be well
secured and stable.
3. Before using and reusing, inspect the product carefully. Discard
any products that have cut, damaged or frayed wire insulation
cords, cracks, lamp holders or enclosures, loose connections,
or exposed copper wire.
4. When storing the product, carefully remove the product from
wherever it is placed, including trees, branches, or bushes, to
avoid any undue strain or stress on the product conductors,
connections and wires.
5. When not in use, store neatly in a cool, dry location protected
from sunlight.
Congratulations! Youre the proud owner of a
Gemmy Airblown
®
Inflatable. Please read over
the directions carefully before using your Gemmy
Airblown
®
Inflatable.
CONTENTS
Airblown
®
Inflatable Unit 1 piece
Base Stakes 4 pieces
Tether Stakes 4 pieces
Nylon Tethers 4 pieces
Extra C-7 Light Bulb 1 piece
5 Amp, 125V Fuse 1 piece
GENERAL INSTRUCTION
1. Remove contents from
packaging. Lay out deflated
Airblown
®
Inflatable in a clear
area.
2. Locate four clips on the bottom
of the fabric and attach to the
plastic legs (See illustration 1).
3. Turn unit upright. Make sure the
air intake is clear of fabric or
other obstruction and zipper is
fully closed.
4. Insert the base stakes through
the plastic legs into the ground
(See illustration 2).
5. Plug into receptacle or other
outlet device to inflate your
Airblown
®
Inflatable.
6. Once fully inflated, clip the
tethers to each of the nylon loops
on the side of the Airblown
®
Inflatable (See illustration 3).
INSTRUCTIONS
illustration 1
illustration 2
illustration 3
AB-1-E
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - GENERAL INSTRUCTION

1WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow all instructions listed below, may result in electric shock, fire and/or serious perso

Page 2 - FREQUENTLY ASKED QUESTIONS

27. Insert the tether stakes into the ground and attach the tethers(See illustration 4).8. To deflate, unplug fan. For faster deflation, unzip zipper

Page 3 - THESE ITEMS

3Visit WWW.GEMMY.COM for more information.©2014 GEMMY INDUSTRIES CORP.117 WRANGLER DRIVE. SUITE 100COPPELL, TX 75019 U.S.A.1 (877) 250-9032MADE IN CHI

Commentaires sur ces manuels

Pas de commentaire